Floral Mechanics

 

 

Delivery Information

Metal Work
Our latest range of metalwork products includes floral stands, decorative candle holders, metal containers such as vases and urns. Also in this section, lead based pin holders and foam anchors with brass pins, these can be safely submerged in water without any possibility of rusting. Plus a choice of anchors and clamps to secure driftwood in your floral arrangements.

Scrolled Candleholder. No.263
4in/10cm tall metalwork stand suitable for small floral arrangements.
Top approximately 3in/7.5cm square.
Manufactured in the United Kingdom and finished in a black epoxy coating.  

£4.90 each.
Scrolled Candleholder
Top of page

If required, further items of stock from this page can be added at check-out.

Triple Spiral Column Candleholder. No.384.
Contemporary candleholder for a single dinner candle, 8" (20 cm) tall.

If required, Candle Holder Cup. No.4068 fits neatly into the holder. For more information on Candle & Bottle Top Cups, please Click Here.

Made in Great Britain, finished in a black epoxy coating.
£7.40 each.

Triple Spiral Column Candleholder
Double Spiral Candleholder. No.661.
Elegant candleholder with a 11.50cm/4.5in diameter saucer with a spike in the centre to support a pillar candle up to 8cm/3in in diameter. This short spike could be removed if required to be replaced with a Junior Bowl no.4029 or the slightly larger Pop Bowl no.4225.

For more information on Junior and Pop Bowls please Click Here.

A standard 22mm diameter dinner candleholder will fit into the holder at each end of the stand. Alternatively, Candle Holder Cup No.4068 fits neatly into each holder. For more information on  Candle & Bottle Top Cups, please Click Here.

Approximately 13cm/5in tall, 33cm/13in wide, finished in black.

£12.50 each.

Double Spiral Candleholder
Candleholder 95mm base. No.159B.
Tulip shaped sconce allows a candle between  22-25mm approximate diameter to be inserted. 
Finished in black.
£2.85 each.
Candleholder 95mm base
Candleholder 95mm base. No.181B.
Holds a straight sided candle up to 30mm dia at base.
Finished in black.
£2.75 each.
Candleholder 95mm base
Candleholder 65mm base. No.201B.
Holds a straight sided candle up to 22mm dia at base.
Finished in black.
£2.65 each.
Candleholder 65mm base

 

Top of page

If required, further items of stock from this page can be added at check-out.

Telescopic Stand
With wrought iron legs.
Height adjusted by thumb screw.
Flat circular top with lipped edge 13.5cm dia.
Black matt finish.
No.065B.
All dimensions are approximate.
£10.50 each
Telescopic stand for flower arrangements.

Telescopic stand for flower arrangements

Retracted approx 21cm

Extended max. 32cm

Telescopic Stand
Small Moon Stand No.405.
8in/20cm tall with a 3.75in/9.5cm diameter saucer. 
Finished in black.
£4.20 each.
Small Moon Stand
Large Moon Stand No.215.
10in/25.5cm tall with 3in/81mm diameter saucer.
Finished in black.
£4.20 each.
Large Moon Stand
Top of page

If required, further items of stock from this page can be added at check-out.

Pin Clamp.
Useful as Driftwood Clamp/Pin Holder. 
This 1.5in/38mm diameter pin holder has, attached to its base, a clamp that will securely hold a piece of driftwood or cutting up to 1in/25m wide. The clamp, easily adjusted by a thumb screw can be used to arrange flowers on a piece of driftwood, or it is ideal to anchor a particularly heavy piece of driftwood, since it can be turned over and the pins inserted into those of a larger pin holder, thus increasing the weight of the base. Finished in a black epoxy coating, approximate weight 330g
No.9049.
£8.25 each.
Pin Clamp
Driftwood Clamp. 
Driftwood clamp with a lead base approximately 3.25ins/82mm across and weighing 325g. The clamp, easily adjusted by a thumb screw will securely hold a piece of driftwood up to 1in/25mm. Finished in a black epoxy coating.
No.9047.
£6.95 each.
Driftwood Clamp

 

Driftwood Anchor.
The ideal anchor for driftwood, approximately 3in/76mm diameter lead base, approximately 260g overall weight. The centre screw is 1.25in/32mm long for securing into your driftwood. Finished in a black epoxy coating.
Made in Great Britain. 
No.9045.
£5.20 each.
Driftwood Anchor
1in/25mm Lead Base Pin Holder.
Round pin holder, heavy lead base with 12mm brass pins, overall weight 50g. Can be re-used almost indefinitely as it will not rust.
Sizes and weights are approximate.
Made in Great Britain.
No.9000. 
£2.60 each
Lead Base Pin Holder
2in/50mm Lead Base Pin Holder.
Round pin holder, heavy lead base with 12mm brass pins, overall weight 195g. Can be re-used almost indefinitely as it will not rust.
Sizes and weights are approximate.
Made in Great Britain.
No.9003.
£6.00 each
Lead Base Pin Holder
3in/76mm Lead Base Pin Holder.
Round pin holder, heavy lead base with 12mm brass pins, overall weight 490g. Can be re-used almost indefinitely as it will not rust.
Sizes and weights are approximate.
Made in Great Britain.
No.9006.
£12.75 each.
Lead Base Pin Holder
2in/50mm lead based, brass pins, floral foam anchor. Floral Foam Anchor.
2in/51mm diameter. Lead base with 1.25in/32mm long brass pins. Weighs approximately 210g to underpin floral foam and counterbalance the weight of flowers. Economical investment that will not rust which can be re-used almost indefinitely.
Made in Great Britain.
No.9041.
£3.50 each.
Floral Foam Anchor
3in/75mm lead based, brass pins, floral foam anchor. Floral Foam Anchor.
3in/76mm diameter. Lead base with 1.25in/32mm long brass pins. Weighs approximately 310g to underpin floral foam and counterbalance the weight of flowers. Economical investment that will not rust which can be re-used almost indefinitely.
Made in Great Britain.
No.9042.
£4.30 each.
Floral Foam Anchor
Floral Foam Anchor.
Rectangular 6in/152mm x 2in/51mm.
Lead base with 1.25in/32mm long brass pins. Weighs approximately 590g to underpin a standard brick of floral foam and counterbalance the weight of flowers. Economical investment that will not rust which can be re-used almost indefinitely.
Made in Great Britain.
No.9044
£5.50 each.
Floral Foam Anchor
Top of page

If required, further items of stock from this page can be added at check-out.

  All our prices include VAT.
Please Click Here for our delivery information.
 
Home Page   Keep a check on your purchases
 

site stats
 

Telephone contact details.
UK: 0117-904-9994.

Floral Mechanics
Kingswood
BRISTOL. 
BS30 9ZT.
Great Britain.


Copyright© 2016.
Floral Mechanics.
All rights reserved.